LTSP

eero
Site Admin
Viestit: 329
Liittynyt: 07 Marras 2007 20:17

LTSP

Viesti Kirjoittaja eero »

Palvelin ja yksi verkkokortti

Asenna edubuntu server 8.04 ja valitse ltsp-asennus f4:lla asennuksen alkuvaiheessa.
Tee verkkoasetukset käsin ja muista tarkastaa, ettei verkossa ole muita dhcp-palvelimia.

Aja päivitykset.

Hae kielipaketit Synapticilla. Kirjoita hakuruutuun language-pack-fi ja valitse language-pack-fi ja language-pack-fi base

Jos Firefox on englanninkielinen asenna http://releases.mozilla.org/pub/mozilla ... win32/xpi/ Valitsi fi.xpi.
(todennäköisesti saat herjan jostain. Tarkasta versionumero linkistä (3.0.1) )

Poista kansio i386 polusta /opt/ltsp

Muokkaa /etc/ltsp/dhcp.conf:
  • #
    # Default LTSP dhcpd.conf config file.
    #
    ### Tarkasta nimipalvelimen osoite
    ### Tarkasta reitittimen osoite.
    ##### Jos kaksi verkkokorttia niin sisäverkon osoite eli serveri

    authoritative;

    subnet 192.168.0.0 netmask 255.255.255.0 {
    range 192.168.0.20 192.168.0.250;
    option domain-name "koti.local";
    option domain-name-servers 192.168.0.254;
    option broadcast-address 192.168.0.255;
    option routers 192.168.0.1;
    # next-server 192.168.0.1;
    # get-lease-hostnames true;
    option subnet-mask 255.255.255.0;
    option root-path "/opt/ltsp/i386";
    if substring( option vendor-class-identifier, 0, 9 ) = "PXEClient" {
    filename "/ltsp/i386/pxelinux.0";
    } else {
    filename "/ltsp/i386/nbi.img";
    }
    }
Käynnistä DHCP-palvelin /etc/init.d/dhcp3-server restart

Aja komentoriviltä ltsp-build-client
Tämä siksi, ettei systeemi jostain syystä toimi.


Aja codekit
  • Tähän on varmaan parempiakin keinoja mutta tää on ylivoimaisesti helpoin =).
    Yritä soittaa jotain mp3-biisiä. Toteemi aukeaa ja ilmoittaa ettei ole sopivaa codekkia. Etsi oikea codekki ja valitse molemmat.
    Asenna ja siinä kaikki.
Asenna Acrobat Reader
Asenna FlashPayer
  • Mene Synaptikin pakettienhallintaan ja kirjoita haku-kenttään flashplayer.
    Valitse kaikki paketit asennettaviksi.
    Asennukseen jälkeen jos selain on auki niin sulje se ja avaa uusiksi ja homman pitäisi toimia

Asenna Java
  • apt-get install sun-java6-jre
    Jotta Java toimisi selaimessa, tarvitset selainliitännäisen.
    32-bit-käyttis: apt-get install sun-java6-plugin
    64-bit-käyttis: apt-get install icedtea-java7-plugin

Asenna fontit
  • Sisältää fontit
    * Andale Mono
    * Arial Black
    * Arial (Bold, Italic, Bold Italic)
    * Comic Sans MS (Bold)
    * Courier New (Bold, Italic, Bold Italic)
    * Georgia (Bold, Italic, Bold Italic)
    * Impact
    * Times New Roman (Bold, Italic, Bold Italic)
    * Trebuchet (Bold, Italic, Bold Italic)
    * Verdana (Bold, Italic, Bold Italic)
    * Webdings

    apt-get install msttcorefonts
    Ota fontit käyttöön fc-cache -fv

Asenna Samba
Synaptic-pakettienhallinnasta. Etsi hakusanalla samba ja valitse listalta Samba.

Luo Sambaa varten tarvittavat kansiot:
  • Luodaan samba-kansio mkdir /home/samba
    Luodaan netlogon-kansio johon tulevat logon-scriptit. Nimen pitää olla logon.cmd mkdir /home/samba/netlogon
    Luodaan profiilikansio johon tulevat windows-profiilit mkdir /home/samba/profiles
    Määritellään omistajat chown -R root:users /home/samba/
    Annetaan kaikki oikeudet. Pääsyoikeudet määritellään smb.conf:ssa. Täydet oikeudet vaaditaan jotta uudet käyttäjät voivat luoda omat profiilit ja muutokset profiiliin tallentuvat. chmod -R 777 /home/samba/
Jokaista Windows-konetta varten täytyy luoda "konetili".
  • Luodaan ryhmä groupadd -g 201 machines
    Luodaan konetili useradd -g machines -d /dev/null -c "konenimi" -s /bin/false konenimi$
    Määritellään salasana passwd -l konenimi$
    Määritellään sambasalasanan smbpasswd -a -m konenimi
Lisää jo voimassa olevat käyttäjät samba-käytäjiksi. Syötä samat salasanat kuin paikallisessa kirjautumisessa.
Uudet käyttäjät on helpointa luoda Webmin:llä. Siitä ohje alempana Webmin-kohdassa.
  • smbpasswd -a root
    smbpasswd -a eero
Samban konffi tapahtuu /etc/samba/smb.conf (muista ottaa varmistus ennen muokkausta)
Muokkaa /etc/samba/smb.conf muotoon:
  • #
    # Sample configuration file for the Samba suite for Debian GNU/Linux.
    #
    #
    # This is the main Samba configuration file. You should read the
    # smb.conf(5) manual page in order to understand the options listed
    # here. Samba has a huge number of configurable options most of which
    # are not shown in this example
    #
    # Any line which starts with a ; (semi-colon) or a # (hash)
    # is a comment and is ignored. In this example we will use a #
    # for commentary and a ; for parts of the config file that you
    # may wish to enable
    #
    # NOTE: Whenever you modify this file you should run the command
    # "testparm" to check that you have not made any basic syntactic
    # errors.
    #

    #======================= Global Settings =======================

    [global]

    ## Browsing/Identification ###

    # Change this to the workgroup/NT-domain name your Samba server will part of
    workgroup = KOULU

    # server string is the equivalent of the NT Description field
    server string = Palvelin

    # Windows Internet Name Serving Support Section:
    # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
    ; wins support = no

    # WINS Server - Tells the NMBD components of Samba to be a WINS Client
    # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    ; wins server = w.x.y.z

    # This will prevent nmbd to search for NetBIOS names through DNS.
    dns proxy = no

    # What naming service and in what order should we use to resolve host names
    # to IP addresses
    ; name resolve order = lmhosts host wins bcast

    hosts allow = 192.168.0. 127.

    #### Networking ####

    # The specific set of interfaces / networks to bind to
    # This can be either the interface name or an IP address/netmask;
    # interface names are normally preferred
    #
    # TARKASTA OIKEA ETH
    #

    interfaces = 192.168.0.0/255.255.255.0 eth0

    # Only bind to the named interfaces and/or networks; you must use the
    # 'interfaces' option above to use this.
    # It is recommended that you enable this feature if your Samba machine is
    # not protected by a firewall or is a firewall itself. However, this
    # option cannot handle dynamic or non-broadcast interfaces correctly.
    ; bind interfaces only = true



    #### Debugging/Accounting ####

    # This tells Samba to use a separate log file for each machine
    # that connects
    log file = /var/log/samba/log.%m

    # Cap the size of the individual log files (in KiB).
    max log size = 1000

    # If you want Samba to only log through syslog then set the following
    # parameter to 'yes'.
    ; syslog only = no

    # We want Samba to log a minimum amount of information to syslog. Everything
    # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
    # through syslog you should set the following parameter to something higher.
    syslog = 0

    # Do something sensible when Samba crashes: mail the admin a backtrace
    panic action = /usr/share/samba/panic-action %d


    ####### Authentication #######

    # "security = user" is always a good idea. This will require a Unix account
    # in this server for every user accessing the server. See
    # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
    # in the samba-doc package for details.
    security = user

    # You may wish to use password encryption. See the section on
    # 'encrypt passwords' in the smb.conf(5) manpage before enabling.
    encrypt passwords = true

    # If you are using encrypted passwords, Samba will need to know what
    # password database type you are using.
    passdb backend = tdbsam

    obey pam restrictions = yes

    ; guest account = nobody
    ; invalid users = root

    # This boolean parameter controls whether Samba attempts to sync the Unix
    # password with the SMB password when the encrypted SMB password in the
    # passdb is changed.
    unix password sync = yes

    # For Unix password sync to work on a Debian GNU/Linux system, the following
    # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
    # sending the correct chat script for the passwd program in Debian Sarge).
    passwd program = /usr/bin/passwd %u
    passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

    # This boolean controls whether PAM will be used for password changes
    # when requested by an SMB client instead of the program listed in
    # 'passwd program'. The default is 'no'.
    pam password change = yes

    # This option controls how nsuccessful authentication attempts are mapped
    # to anonymous connections
    map to guest = bad user

    ########## Domains ###########

    # Is this machine able to authenticate users. Both PDC and BDC
    # must have this setting enabled. If you are the BDC you must
    # change the 'domain master' setting to no
    #
    domain logons = yes
    #
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of the user's profile directory
    # from the client point of view)
    # The following required a [profiles] share to be setup on the
    # samba server (see below)

    # Määrittää mihin Windows-profiilit tallentuvat

    logon path = \\server\profiles\%U

    # Another common choice is storing the profile in the user's home directory

    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of a user's home directory (from the client
    # point of view)

    # Automaattinen verkkomappaus kotikansiolle

    logon drive = T:
    logon home = \\server\%U

    # The following setting only takes effect if 'domain logons' is set
    # It specifies the script to run during logon. The script must be stored
    # in the [netlogon] share
    # NOTE: Must be store in 'DOS' file format convention

    # Logon scriptin nimi
    # Kohde määritellään kohdassa [netlogon]

    logon script = logon.cmd

    # This allows Unix users to be created on the domain controller via the SAMR
    # RPC pipe. The example command creates a user account with a disabled Unix
    # password; please adapt to your needs
    ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

    ########## Printing ##########

    # If you want to automatically load your printer list rather
    # than setting them up individually then you'll need this
    ; load printers = yes

    # lpr(ng) printing. You may wish to override the location of the
    # printcap file
    ; printing = bsd
    ; printcap name = /etc/printcap

    # CUPS printing. See also the cupsaddsmb(8) manpage in the
    # cupsys-client package.
    ; printing = cups
    ; printcap name = cups

    ############ Misc ############

    # Using the following line enables you to customise your configuration
    # on a per machine basis. The %m gets replaced with the netbios name
    # of the machine that is connecting
    ; include = /home/samba/etc/smb.conf.%m

    # Most people will find that this option gives better performance.
    # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
    # for details
    # You may want to add the following on a Linux system:
    # SO_RCVBUF=8192 SO_SNDBUF=8192
    ; socket options = tcp_nodelay

    # The following parameter is useful only if you have the linpopup package
    # installed. The samba maintainer and the linpopup maintainer are
    # working to ease installation and configuration of linpopup and samba.
    ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

    # Domain Master specifies Samba to be the Domain Master Browser. If this
    # machine will be configured as a BDC (a secondary logon server), you
    # must set this to 'no'; otherwise, the default behavior is recommended.
    domain master = auto

    # Some defaults for winbind (make sure you're not using the ranges
    # for something else.)
    ; idmap uid = 10000-20000
    ; idmap gid = 10000-20000
    ; template shell = /bin/bash

    # The following was the default behaviour in sarge,
    # but samba upstream reverted the default because it might induce
    # performance issues in large organizations.
    # See Debian bug #368251 for some of the consequences of *not*
    # having this setting and smb.conf(5) for details.
    ; winbind enum groups = yes
    ; winbind enum users = yes

    # Setup usershare options to enable non-root users to share folders
    # with the net usershare command.

    # Maximum number of usershare. 0 (default) means that usershare is disabled.
    ; usershare max shares = 100

    # Allow users who've been granted usershare privileges to create
    # public shares, not just authenticated ones
    usershare allow guests = yes

    #======================= Share Definitions =======================

    # Un-comment the following (and tweak the other settings below to suit)
    # to enable the default home directory shares. This will share each
    # user's home directory as \\server\username
    [homes]
    comment = Home Directories
    browseable = no

    # By default, the home directories are exported read-only. Change the
    # next parameter to 'no' if you want to be able to write to them.
    read only = no

    # File creation mask is set to 0700 for security reasons. If you want to
    # create files with group=rw permissions, set next parameter to 0775.
    create mask = 0775

    # Directory creation mask is set to 0700 for security reasons. If you want to
    # create dirs. with group=rw permissions, set next parameter to 0775.
    directory mask = 0775

    # By default, \\server\username shares can be connected to by anyone
    # with access to the samba server. Un-comment the following parameter
    # to make sure that only "username" can connect to \\server\username
    # This might need tweaking when using external authentication schemes
    valid users = %S

    # Un-comment the following and create the netlogon directory for Domain Logons
    # (you need to configure Samba to act as a domain controller too.)

    # Määrttää kirjautumiscriptin paikan ja oikeudet
    # Luotava kansio mkdir /home/samba/netlogon

    [netlogon]
    comment = Network Logon Service
    path = /home/samba/netlogon
    guest ok = yes
    read only = yes
    share modes = no

    # Un-comment the following and create the profiles directory to store
    # users profiles (see the "logon path" option above)
    # (you need to configure Samba to act as a domain controller too.)
    # The path below should be writable by all users so that their
    # profile directory may be created the first time they log on

    # Määritellään profiilikansion oikeudet
    # Päätteeltä pitää antaa kansio-oikeudet:
    # chown -R root:users /home/samba/
    # chmod -R 777 /home/samba/


    [profiles]
    browseable = no
    writeable = yes
    path = /home/samba/profiles
    create mask = 0775
    comment = Users profiles
    directory mask = 0775

    [printers]
    comment = All Printers
    browseable = no
    path = /var/spool/samba
    printable = yes
    ; guest ok = no
    ; read only = yes
    create mask = 0700

    # Windows clients look for this share name as a source of downloadable
    # printer drivers
    [print$]
    comment = Printer Drivers
    path = /var/lib/samba/printers
    ; browseable = yes
    ; read only = yes
    ; guest ok = no
    # Uncomment to allow remote administration of Windows print drivers.
    # Replace 'ntadmin' with the name of the group your admin users are
    # members of.
    ; write list = root, @ntadmin

    # A sample share for sharing your CD-ROM with others.
    ;[cdrom]
    ; comment = Samba server's CD-ROM
    ; read only = yes
    ; locking = no
    ; path = /cdrom
    ; guest ok = yes

    # The next two parameters show how to auto-mount a CD-ROM when the
    # cdrom share is accesed. For this to work /etc/fstab must contain
    # an entry like this:
    #
    # /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
    #
    # The CD-ROM gets unmounted automatically after the connection to the
    #
    # If you don't want to use auto-mounting/unmounting make sure the CD
    # is mounted on /cdrom
    #
    ; preexec = /bin/mount /cdrom
    ; postexec = /bin/umount /cdrom

Uudelleenkäynnistä samba
  • /etc/init.d/samba restart
Asenna system-config-samba
  • Tällä saat helpolla muokattua samban jakoja
    Avaa Synaptic
    Kirjoita hakuruutuun system-config-samba
    Asenna
Asenna DNS
  • Komentoriviltä apt-get install bind9
    Muokkaa /etc/bind/named.conf.options:
    • options {
      directory "/var/cache/bind";

      // If there is a firewall between you and nameservers you want
      // to talk to, you might need to uncomment the query-source
      // directive below. Previous versions of BIND always asked
      // questions using port 53, but BIND 8.1 and later use an unprivileged
      // port by default.

      // query-source address * port 53;

      // If your ISP provided one or more IP addresses for stable
      // nameservers, you probably want to use them as forwarders.
      // Uncomment the following block, and insert the addresses replacing
      // the all-0's placeholder.

      forwarders {
      192.89.123.231;
      193.210.19.190;
      };

      auth-nxdomain no; # conform to RFC1035
      listen-on-v6 { any; };
      };
      Muuta oikeat nimipalvelimet
    Käynnistä palvelu /etc/init.d/bind9 restart
Asenna Webmin Luodaan käyttäjiä:
  • Avaa webmin osoitteesta https://localhost:10000
    Valitse System -> Users and groups
    Valitse Create a new user
    Kirjoita Username, Real name
    Password kohtaan valitse Normal password ja kirjoita salasana
    Varmista, että kohdassa Group Membership-kohdassa Existing group on users
    Varmista että kohdassa Upon Creation..-kohdassa kaikki kohdat ovat Yes. Tämä luo samba-käyttäjät samalla.
    Valitse painike Create

Asennetaan seuraavat ohjelmat:
  • Kalzium
    Ghemical
    GChemPaint
    KStars
    TuxPaint
    TuxMath
    Childsplay
    Gcompris
    Kanagram
    KBruch
    KhangMan
    KPercentage
    KTouch
    OpenOffice-kaavaeditori

Jotta ohjelmat olisivat suomenkielisiä pitää asentaa kielipaketit:

Synaptic -> Haku -> language
  • language-pack-fi-base
    language-pack-fi
    language-pack-kde-fi-base
    language-pack-kde-fi
Jos ohjelmat eivät ole suomenkielisiä valitse synaptic -> KDE-työpöytäympäristö (universe) -> kde-l10n-fi.
Asenna





______________________________________________________________

Clientin käynnistys

Jos haluat käyttää levykettä clientien käynnistykseen, hae oikea ajuri http://rom-o-matic.net/gpxe/gpxe-0.9.3/ ... m-o-matic/
Asennus tapahtuu komennolla cat gpxe-0.9.3-ajurinnimi.dsk > /dev/fd0



Jos haluat bootata kovalevyltä homma on hieman vaikeampi. Toimi seuraavasti.

Linkki sivulle: http://etherboot.anadex.de/

Kopioi tiedosto (poista lopusta .txt)
eb_on_hd.ima.txt
Kirjoitaa tiedot kovalevylle
(1.41 MiB) Tiedosto ladattu 890 kertaa
Kirjoita levykkeelle ima-tiedosto:
Windows: Kopioi rawrite ja kirjoita sillä
rawwritewin-0.7.zip
Rawrite
(209.75 KiB) Tiedosto ladattu 945 kertaa
Linux: dd if=eb_on_hd.ima of=/dev/fd0
Hae oikea ajuri sivulta http://rom-o-matic.net/gpxe/gpxe-0.9.3/ ... m-o-matic/ ja valitse ISO-tiedosto
Pura isokuva johonkin sopivaan paikkaan
Nimeä iso-kuvassa ollut ajuri AjurinNimi.krn muotoon AjurinNimi.lil (tarkasta levykkeeltä oikean ajurin nimi. Saat sen selville myös käynnistämällä client-kone levykkeeltä.) Ajurin nimi pitää olla sama kuin levykkeellä oleva ajuri.
Kopioi uudelleennimetty ajuri levykkeelle ja korvaa vanha. (Tämä siksi, että levykkeellä oleva ajuri lataa img-tiedoston palvelimelta ja uusi ajuri PXE-tiedoston)
Käynnistä levykkeeltä ja valitse listalta INSTALL etherboot to hard disk / MODIFY this floppy
Valitse kohta 2 -HD Install STEP 1 - clear partition table, create FAT partition, write MBR
Asennuksen loputtua kone käynnistyy itsekseen. Älä poista levykettä vaan anna käynnistyä levykkeeltä.
Valitse listalta INSTALL etherboot to hard disk / MODIFY this floppy
Valitse kohta 5 -HD Install STEP 2 - format, install Etherboot (just a single driver)
Asennuksen lopussa älä poista levykettä vaan anna bootata ja poista bootin aikana levyke.
Tämän jälkeen, jos olet kopioinut oikean ajurin levykkeelle, homman pitäisi toimia =).

VINKKI: Jos et tiedä mitä ajuria käytetään, boottaa ennen levykkeen muokkausta client levykkeeltä. Silloin näet minkä nimistä ajuria käytetään.

______________________________________________________________________
eero
Site Admin
Viestit: 329
Liittynyt: 07 Marras 2007 20:17

Re: LTSP

Viesti Kirjoittaja eero »

Kaksi verkkokorttia

Jos haluat käyttää omaa palomuuria kannattaa käyttää kahta verkkokorttia.

Asenna firestarter

Määritä Järjestelmä -> Firestarter
  • Käynnistä palomuuri yhteyden muodostuttua -> eteenpäin
    Enable internet connection sharing
    • Valitse oikea sisäverkko (yleensä eth1)
    -> eteenpäin
    Start firewall now -> Tallenna
Lisää seuraavat asetukset
Preference
  • Policy -> Apply policy changes immediately
    Network settings
    • Enable internet connection sharing
      Enable DHCP for the local network
Siirry Plicy välilehdelle
Valitse Inbound traffic policy
Klikkaa hiiren oikealla Allow connections from host. Valitse Add rule
Salli sisäverkko 192.168.0.1/24 -> Lisää

Määritä toiseen verkkokorttiin ulkoisen ip:n asetukset. Älä koske sisäverkon asennuksen tietoihin.
Ole tarkkana kumpi on sisäverkko ja kumpi ulkoverkon verkkokortti.
Kännistä verkko /etc/init.d/networking restart
Vastaa Viestiin