POSTIE is (c) copyrighted 1996-2005 and written by Andrew George Davison and Infradig Systems.


POSTIE is a command-line mail client that handles multi-part MIME attachments, HTML mail, UUencode/decode,
POP3 and IMAP4 reading, SMTP, NNTP (Usenet) and IMAP4 posting. HTTP fetching and list-server processing.
And much more!

POSTIE doesn't have a GUI as it is not meant to be used directly as an email client... it was designed for
back-end processing, to be used with schedulers, CGI, or to be exec driven from another program.

WIN95: requires the WinSock2 upgrade from http://support.microsoft.com/support/kb/articles/Q182/1/08.ASP


LICENSING:

Licenses for the full feature version are available from as little as US$25. Other pricing options are
available including commercial use, redistribution and source. Details are available online:

    mailto:info@infradig.com
    http://www.infradig.com

Support priority will be given to people who have purchased the product. Time constraints may mean that others
may not have their questions answered at all.


FREQUENT PROBLEMS:

Command-line options may not be abbreviated and are case-sensistive, so be careful! I get lots of mail
about this or that option not working and 90% of the time it's this. Also, double-quotes can be used
on any option that may legally contain spaces (filenames, email-addresses, text strings etc).

Be careful about default input when sending mail! The other 90% of queries I get is people leaving off
-nomsg or -msg:"text" or -file:filename or <filename and complaining that POSTIE just sits there indefinitely
and does nothing. If you don't supply a message body POSTIE tries to read from standard-input to supply one.
You can then type in some text and terminate input in the usual manner, or you should more likely use one of
the options listed above.

Be careful using embedded double quotes, most shells require you to use \" to do so. For example...

    postie -s:"This is a \"test\" message".


There is also a known problem with sending attachments when the current working directory is read-only or a
Novell/Netware mounted drive. This is a problem with the Microsoft C run-time libraries and has existed for many
years. Just CD to your hard-drive and use full path names on file specs.

If you are still having problems and feel the need to email me, use the '-v' option to get a
detailed listing of the protocol interacation and include it with any problem report.

Finally, read this document again. All of it. There are a zillion options and some have interactions
that may slightly alter the operation of another.





BASIC USAGE: (example only) square brackets '[]' indicate optional usage.



For SMTP posting of a pre-formatted MIME message...

  postie -t -raw -file:filename]



For SMTP posting...

  postie [-host:server[,...]] -to:address[,...] [-cc:address[,...]] [-bcc:address[,...]]
         [-tolist:filename] [-cclist:filename] [-bcclist:filename]
         -from:address [-replyto:address] -s:subject [-file:filename ...] [-msg:text] [-nomsg]
         [-a:filename ...] [-uue]  [-high|-low]

  see also -config and -import options for alternatives to using a command-line.



For ESMTP authenticated posting...

  postie -esmtp -user:userid -pass:password [-crammd5] ...posting-options... 


For NNTP posting... (NOT AVAILABLE IN FREE VERSION)

  postie -news [-noarchive] [-host:server[,...]] -to:newsgroup[,...] [-cc:newsgroup[,...]]
         -from:address [-replyto:address] -s:subject [-file:filename ...] [-msg:text] [-nomsg]
         [-a:filename ...] [-uue] [-user:userid -pass:password] [-url:URL]


For PGP posting... (NOT AVAILABLE IN FREE VERSION)

  postie ...posting options... -pgp [-sign|-encrypt] [-pgppass:passphrase]


For HTML posting... (NOT AVAILABLE IN FREE VERSION)

  postie ...posting-options... -html -file:filename [-alt[:filename]] [-i:imagefile|cid]


For VPIM posting... (NOT AVAILABLE IN FREE VERSION)

  postie ...posting-options... -vpim -a:"filename|headers" ...


For IMAP4 posting to a folder... (NOT AVAILABLE IN FREE VERSION)

  postie [-host:server[,...]] -imap [-mbox:foldername] -user:userid -pass:password [-crammd5] -to:address[,...]
         -from:address [-replyto:address] -s:subject [-file:filename ...] [-msg:text] [-nomsg]
         [-a:filename ...] [-uue] [-high|-low]


For posting with an import file... (NOT AVAILABLE IN FREE VERSION)

  postie -import -file:filename (see 'import.txt' for details).






For POP3 retrieving...

  postie [-host:server] -user:userid -pass:password [-apop] [-br] [-full] [-file:outfilename] [-raw] [-html]
         [-extract:[path]] [-msg:nbr] [-rm] [-relay[:hostname] [-alias:filename | -to:address]] [-receipt|-mdn]
         [-pat:pattern | -nopat:pattern] [-spat:pattern | -nospat:pattern]



For IMAP4 retrieving... (NOT AVAILABLE IN FREE VERSION)

  postie [-host:server] -imap [-user:userid -pass:password [-crammd5] | -preauth] [-br] [-full] [-file:outfilename] [-raw] [-html]
         [-extract:[path]] [-msg:nbr] [-rm] [-receipt|-mdn]
         [-mbox:folder] [-create:folder] [-delete:folder] [-move:folder|-copy:folder] [-purge]
         [-pat:pattern | -nopat:pattern] [-spat:pattern | -nospat:pattern]
         [-relay[:hostname] [-user2:userid] [-pass2:password] [-mbox2:folder]]


For PGP retrieving... (NOT AVAILABLE IN FREE VERSION)

  postie ...retrieving options... -pgp [-pgppass:passphrase]





For attaching a directory full of files... (NOT AVAILABLE IN FREE VERSION)

  postie ...posting-options... [-dir:file-spec|-rdir:file-spec]


For attaching a directory full of files one per message... (NOT AVAILABLE IN FREE VERSION)

  postie ...posting-options... -train [-dir:file-spec|-rdir:file-spec] [-addr:wildcard-spec]





For posting with LDAP lookup... (NOT AVAILABLE IN FREE VERSION)

  postie ...posting-options... -ldap:server[:port] [-base:dn] [-search:filter] [-ldapcc|-ldapbcc]




For setting IMAP4 Access Control Lists (ACLs)... (NOT AVAILABLE IN FREE VERSION)

  postie [-host:server] -imap [-user:userid -pass:password | -preauth] -mbox:folder
         [-getacl] [-setacl:userid:rights] [-deleteacl:userid]
         [-listrights:userid] [-myrights]






For use of SSL/TLS... (NOT AVAILABLE IN FREE VERSION)

  postie ...regular-options... [-ssl|-tls] [-relay:host [-sslrelay|-tlsrelay]]





For mail-file (.eml etc.) retrieving...

  postie -mail [-host:filename] [-br] [-full] [-extract:path] [-file:outfilename]


For mail-file (.eml etc.) forwarding...

  postie -mail [-host:filename] -relay[:server] [-to:address]


For mail-file (.eml etc.) posting...

  postie ...posting-options... -mf [-host:filename]




For XML reading...

  postie -xml [-file:filename] [XPointer...]

   where an 'XPointer' is:

              [-root]
              [-id:name]
              [-child:nbr[:name[:attr[:value]]]]
              [-descendant:nbr[:name[:attr[:value]]]]
              [-ancestor:nbr[:name[:attr[:value]]]]
              [-following:nbr[:name[:attr[:value]]]]
              [-preceding:nbr[:name[:attr[:value]]]]
              [-fsibling:nbr[:name[:attr[:value]]]]
              [-psibling:nbr[:name[:attr[:value]]]]

   where 'name' can be '#text', '#pi', '#comment', '#element' or '*', or '#all'.


For XML editing...

  postie -xml -file:filename [Xpointer...] [-drop|-set:value|-add:value] [-save[:filename]]



For list-server processing...

  postie [-host:server] -rm -user:userid -pass:password -tolist:filename -listserv:address -owner:address [-priv] [-fetch:path [-open]] [-every:mins]


For SMTP queue transfer...

  postie [-host:server] -etrn:domain



OPTIONS:

 -host:hostname - 'hostname' is the name of an SMTP server (or POP3 server),
                  defaults to 'localhost'. Can also be set in a <FORM> with
                  a field name of 'postie_host'. When posting mail 'hostname' can
                  optionally be a comma-separated list of server names to try in
                  in the order listed.

 -port:service  - optionally specifiy a port number or service name to connect to.
                  Can also be set in the config file 'postie.txt' by the:
                  SMTP, NNTP, POP3 and IMAP4 keywords. You probably will need to
                  specify this ONLY if you are using a non-standard port or go
                  through a relay of some kind.

 -news          - post a newsgroup article (else send mail). Can also be set in a
                  <FORM> with a field name of 'postie_news'. Also, reverses sense
                  of '-qp' option (see below).
				  (NOT AVAILABLE IN FREE VERSION)

 -imap          - read from an IMAP4 server else POP3 is assumed.
				  (NOT AVAILABLE IN FREE VERSION)

 -apop          - use POP3 'APOP' authentication mechanism if available.
				  (NOT AVAILABLE IN FREE VERSION)

 -crammd5       - use IMAP4/ESMTP 'CRAM-MD5' authentication mechanism if available.
				  (NOT AVAILABLE IN FREE VERSION)

 -noarchive     - when posting to news, set the 'x-no-archive: yes' header so that
                  DejaNews won't store the article.

 -to:address - 'address' is the email address or news-group name of the recipient.
               This option can be used multiple times, or a comma separated list
               may be used.
               NOTE: you can also use addresses of the longer form i.e.
               -to:"Andrew Davison <andrew@infradig.com>" and the older
               variant -to:"andrew@infradig.com(Andrew Davison)". Can also be
               set in a <FORM> with a field name of 'postie_to'.

 -cc:address - 'address' is the email address of the recipient. This option can
               be used multiple times, or a comma separated list may be used.
               Can also be set in a <FORM> with a field name of 'postie_cc'.

 -bcc:address - 'address' is the email address of the recipient. This option can
               be used multiple times, or a comma separated list may be used.
               NOTE: other recipients will be hidden from each other. Can also be
               set in a <FORM> with a field name of 'postie_bcc'.
				  (NOT AVAILABLE IN FREE VERSION)

 -tolist:filename - 'filename' is a file with one email address per line, used 
                    for sending to multiple recipients as an alternative to '-to'.
                    Any line beginning with a '#' is ignored.
					(NOT AVAILABLE IN FREE VERSION)

 -cclist:filename - 'filename' is a file with one email address per line, used
                    for sending to multiple recipients as an alternative to '-cc'.
                    Any line beginning with a '#' is ignored.
					(NOT AVAILABLE IN FREE VERSION)

 -bcclist:filename - 'filename' is a file with one email address per line, used
                    for sending to multiple recipients as an alternative to '-bcc'.
                    Any line beginning with a '#' is ignored.
					(NOT AVAILABLE IN FREE VERSION)

 -hide       - if set other -to: recipients of the message won't see each other. It's
               much better to use -bcc: instead.

 -high          - set importance as high (default is normal).

 -low           - set importance as low (default is normal).

 -dsn           - SMTP: request delivery status notification (DSN) from server.

 -mdn           - SMTP: request mail disposition notification (MDN) from client.

 -notify        - SMTP: request mail delivery & disposition status notification (same as -dsn & -mdn).

 -receipt       - POP3/IMAP4: send read receipt (MDN) to someone whether they requested it or not.

 -mdn           - POP3/IMAP4: send a read receipt (MDN) to someone who requested it.

 -msgid         - generate a Message-ID: header on mail sent (very rare to need this).

 -ns            - For non-stop sending mode. Don't stop on send errors, try and
                  deliver to as many recipients as possible. On by default for
                  list-server processing, otherwise off. If used with '-relay' then
                  the source message is not deleted when '-rm' used as well.

 -esmtp         - use ESMTP features if available from mail server (needed for authentication).
				  (NOT AVAILABLE IN FREE VERSION)

 -from:address - 'address' is the email address of the sender.

 -replyto:address - 'address' is the email address to reply to.

 -verify        - verify email 'from' address (as far as possible).

 -s:subject     - is a string used for the subject line, e.g. -s:"This is a test"
                  Can also be set in a <FORM> with a field name of 'postie_subject'.

 -sfile:file    - read the subject line from the first line of the named file.
				  (NOT AVAILABLE IN FREE VERSION)

 -file:filename - SMTP: an optional specification of an input text-file for the
                  body of the mail message. If not supplied then standard
                  input is assumed (terminate with CTRL-D) unless '-msg' or '-nomsg'.
                  Can be specified multiple times. NOTE: do not use for attachments,
                  see -a: option for that instead.

 -file:filename - POP3/IMAP4: an optional specification of an output file for the body
                  of a mail message. If not supplied then standard
                  output is assumed. If multiple messages are selected
                  for reading then all output will be concatenated to
                  the output file (attachments are extracted inline
                  so this will only work with text messages).

 -file:importfile - SMTP: an option specification of an import control file (see -import).
 
 -sep:string   - output a string between messages when using -file:filename option.

 -raw         	- use to copy headers as well as body. Turns off -extract option. Can be used
                  for posting (see -t option) as well as retrieving.

 -nomsg         - SMTP: no message body is sent, just attachments (see above and -a).

 -msglen:n      - use first 'n' chars of message text when sending.

 -msg:text      - SMTP/IMAP4: use as message body. Escape line-breaks using '\r\n'
                  sequence and '\\' for a \ by itself. If '-file:filename' is used
                  as well then the file contents are appended to the message text.
                  Beware of DOS and/or command-line shell length limitations.

 -msg:nbr       - POP3/IMAP4: select specified message (default is ALL messages).

 -first:nbr     - POP3/IMAP4: read the next specified number of messages (default is ALL).
                  Can be specified as 'FIRST n' in config file.

 -rm            - SMTP: remove file(s) specified by '-file', '-a' & '-url' after use.

 -rm            - POP3: delete the selected message(s). If -br option is
                  used then the messages won't be displayed as they are
                  deleted.

 -rm            - IMAP4: mark for delete the selected message(s). If -br option is
                  used then the messages won't be displayed as they are
                  deleted. There is no method (yet) for undeleting such messages.

 -rmlist        - SMTP: remove files use in '-tolist:', '-cclist:' or '-bcclist:'.

 -rmfile:file   - remove specified file after processing.

 -purge			- IMAP4: any messages marked for deletion are removed from the mailbox (note:
				  this is permanent).

 -html          - optionally specifies use of HTML content type (be
                  sure recipient's mail reader can handle HTML mail
                  before using). Also make sure a <base> document is
                  set in the HTML for embedded images and links. In
                  POP3/IMAP4 mode it formats output to suit display in an
                  HTML browser (and reverses the sense of any
                  'multipart/alternative' content type received). Can
                  also be set in a <FORM> with a field name of 'postie_html'.
				  (NOT AVAILABLE IN FREE VERSION)

 -alt           - HTML input is also translated to plain-text and both are
                  sent as MIME multipart/alternative.
				  (NOT AVAILABLE IN FREE VERSION)

 -alt:textfile  - HTML input is accompanied by specified plain-text and both are
                  sent as MIME multipart/alternative.
				  (NOT AVAILABLE IN FREE VERSION)

 -a:filename    - where 'filename' is the name of a file to be sent with the
                  mail message as a multipart/mixed attachment. The file is removed
                  ONLY if the '-rm' option is also used.
                  This option can be repeated any number of times.
				   (Single use and 256K file size limit in FREE VERSION)

 -a:filename|headers    - where 'filename' is the name of a file to be sent with the
                          mail message and specified headers as a multipart/mixed object.
                          The file is removed ONLY if the '-rm' option is also used.
                          This option can be repeated any number of times.
				   (NOT AVAILABLE IN FREE VERSION)

 -i:filename|url - where 'filename' is the name of a file to be included with the
                   HTML mail message as a multipart/related object and 'url' is the URL or CID
                   of the object as referenced in the HTML message body. All such
                   included objects are encapsulated and sent with the message. Used
                   to send HTML mail with images or applets embedded such that they
                   can be viewed without a web connection.
                   The file is removed ONLY if the '-rm' option is also used.
                   This option can be repeated any number of times.
				   (NOT AVAILABLE IN FREE VERSION)

 -p:filename|headers    - where 'filename' is the name of a file to be sent with the
                          mail message and specified headers as a multipart/related object.
                          Allows creation of a customized MIME part.
                          The file is removed ONLY if the '-rm' option is also used.
                          This option can be repeated any number of times.
				   (NOT AVAILABLE IN FREE VERSION)

 -tmo:secs      - seconds to timeout on reads.

 -train         - modifies use of a following '-dir' or '-rdir' option such that
                  they send a message for each file as a single attachment.
                  A 'message train' is thus generated.
				  (NOT AVAILABLE IN FREE VERSION)

 -dir:filespec   - all files in named directory are attached to the message.
                  NOTE: does not recursively search sub-directories. Can be
				  repeated multiple times and used in conjunction with '-a:'.
                  Can accept wildcards (as in '-pat' option) but note: '*.*'
                  only matches files WITH an extension, so use '*' to get ALL
                  files in a directory. Use ".\" or "./" prefix for local files.
                  Translates '/' to local separator for Unix compatability.
				  (NOT AVAILABLE IN FREE VERSION)

 -rdir:filespec  - all files in named directory are attached to the message.
                  NOTE: recursively searches sub-directories. Can be
				  repeated multiple times and used in conjunction with '-a:'.
                  Can accept wildcards (as in '-pat' option) but note: '*.*'
                  only matches files WITH an extension, so use '*' to get ALL
                  files in a directory. Use ".\" or "./" prefix for local files.
                  Translates '/' to local separator for Unix compatability.
				  (NOT AVAILABLE IN FREE VERSION)

 -addr:wildspec   - when used with -train and and -dir/-rdir, match the wildcard
                  spec against the filename to get the address to send (instead of
                  -to:address option). For example (either of):

                    postie ... -train -dir:"c:\temp\adddress=*.pdf" -addr:"*address=*.pdf"
                    postie ... -train -dir:"c:\temp\adddress=*.pdf" -addr:"c:\\temp\\address=*.pdf"

                  will send file 'address=fred@some.where.pdf' to address 'fred@some.where'. Note the
                  use of double backslash in second example, it's because it specifies a pattern and
                  not an actual file path, and backslash is the escape character in patterns.
				  (NOT AVAILABLE IN FREE VERSION)

 -cnt:number    - send message 'number' times (may be useful for testing?).

 -binary        - force all sent attachments to be binary MIME-type (i.e
                  'application/octet-stream'). This is useful if attaching
                  text and/or HTML files so they don't appear in-line in
                  advanced readers.

 -text          - text attachments (when reading) are written to file in native
                  mode, otherwise they are written in binary mode.

 -text          - all attachments (when sending) are sent as text mode files.
 
 -inline        - mark all attachments as 'inline' for viewing in the message
                  body rather than as separate attachments. This is a hint only
                  to mail viewers. Used when sending.

 -usemime:0|1  - send as a MIME message if set to '1' (on by default).

 -qp:0|1        - encode characters as 'quoted printable' content-type
                  if set to '1' (on by default). Otherwise 8-bit characters
                  will go thru unchanged with 7-bit encoding (see -8 option). If
                  '-news' is specified then this option is set to '0' (off by default)

 -b64           - use base64 encoding (off by default). Not generally used with text.
				  (NOT AVAILABLE IN FREE VERSION)

 -8             - use 8-bit encoding (allows binary data thru unmodified).
                  This option is off by default and is not recomended to use except
                  with 16-bit character sets or when quoted-printable encoding is
                  not supported. If the server doesn't support RFC1652 then this option
                  will have no effect.

 -uue           - attachments OR message are UUencoded before being sent.

 -user:userid   - IMAP4/POP3/NNTP account userid. Can also be set in a <FORM> with
                  a field name of 'postie_user'.

 -pass:passwd   - IMAP4/POP3/NNTP account password. Can also be set in a <FORM> with
                  a field name of 'postie_pass'.            

 -user2:userid   - IMAP4 account userid for destination in IMAP-to-IMAP relay.

 -pass2:passwd   - IMAP4 account password for destination in IMAP-to-IMAP relay.

 -preauth       - used with IMAP4 servers that are 'pre-authorised'. Basically it
                  reads userid/password but doesn't use them (ie. enter dummy values).

 -auth          - in CGI mode use HTTP Basic Authentication scheme instead of
                  user/pass params (this is *slightly* more secure).

 -redirect:url  - output is an HTTP "Location:" header to redirect browsers.
                  Used with '-cgi' option only.

 -mime:mimetype - sets the output mime-type (default is 'text/html'). Used
                  with '-cgi' option only, and necessary if used with an
                  HTML <IMG> tag in conjunction with the '-redirect' option.
                  You can run multiple POSTIE commands by using <IMG> tags
                  with harmlessly redirected reponses, or use be daring
                  and use the <OBJECT> tag to embed text responses.

 -mime:string     - set the MIME type to be used in the Content-Type headers. The default is 'text/plain'
                    for ordinary messages. Can be set in config file as 'MIME string' as well.

 -charset:string  - set the character-set to be used in the MIME headers. The default is 'iso-8859-1'
                    for Western European. Can be set in config file as 'CHARSET string' as well.

 -cgi:query-string - the command-line is actually an HTTP query-string and text
                     input is taken from a file in either 'c:\temp' or
                     '/usr/tmp' depending upon platform. This is for
                     security reasons so that any arbitrary file cannot
                     be grabbed. You can change the path using the POSTIE_PATH
                     environment variable e.g. 'set POSTIE_PATH=c:\uploads'. Any
                     files specified by '-file:' or '-a:' are taken to be relative to
                     this path (and '..' is checked for!). See also the
                     '-post' option.

 -url:url       - where 'url' is the URL to download and save as a file to possibly
                  (see -noop option) send as an attachment.
				  The file is saved to the current-working directory unless the
                  '-extract:path' option is specified. The file is removed ONLY
                  if the '-rm' option is also used. Handles redirects automatically.
                  use the 'PROXY_HOST' and 'PROXY_PORT' config file variables if
                  you need to use a proxy server (for example for FTP use).
                  This option can be repeated any number of times.
                  See also '-post:filename' and '-mime:mimetype' options.

 -url:url|file  - where 'url' is the URL whose contents are to be saved to
                  the file named 'file'. File is automatically added to the
                  attachment list if sending mail.
                  This option can be repeated any number of times.
                  See also '-post:filename' and '-mime:mimetype' options.

 -post          - data input is via CGI POST method rather than a file. Used
                  with '-cgi' option only. 

 -post:filename - data input is via CGI POST method. Used with '-mime:type' and '-url:url' options only. 

 -import        - read an input control file -file:filename (see import.txt). The format is
				  based on Lotus Notes supposedly.

 -t             - read a Unix sendmail compatible input stream to send mail or news (see -news).
                  Recognises standard headers (can be used with -raw for pre-processed MIME).

 -every:mins    - loop back to start every specified minutes (also 'EVERY mins' config keyword).

 -severy:secs   - loop back to start every specified seconds (also 'SEVERY secs' config keyword).

 -v[:level]     - verbose output at designated level (default level is 1 if just '-v').

 -q             - disables message-sent confirmation and a few others.

 >filename       - writes output to log file. also use '-v' option.
 >>filename      - appends output to log file. also use '-v' option.

 -br            - list basic POP3/IMAP4 headers only (else message text gets displayed). Does not change
				  message flags in IMAP.

 -full            - list more POP3/IMAP4 headers.

 -relay[:hostname] - relay mail messages to specified host (default is 'localhost'). Can use the
                     '-to:address' option with this to force sending to a specific address or
                     newsgroup (if '-news' used), otherwise the relay host will have to resolve
                     mailbox addresses. This can be useful when you can't create a .forward file
                     on the original server but want you mail sent on to you somewhere else. Turns
                     off '-br' option automatically and turns on '-raw'. See also the
				 	'-rm' and '-ns' options. NOTE: with POP3 reading relaying is to SMTP, with IMAP
					reading relaying is to IMAP (in the similarly named folder). See also
					the '-sslrelay' and '-tlsrelay' option.

 -extract[:path]  - extract attachments to separate named files, in current-directory or named directory.
				  (NOT AVAILABLE IN FREE VERSION)

 -get:name    - used to retrieve an attachment in CGI mode.

 -config      - read the 'postie.txt' (or whatever 'POSTIE_CONFIG' environment variable points to) configuration file
                (see sample file 'postie.sam' in this directory).
				  (NOT AVAILABLE IN FREE VERSION)
 
 -config:filename - read the specified configuration file (see sample file 'postie.sam' in this directory).
				  (NOT AVAILABLE IN FREE VERSION)

 -listserv:address - set the from/return address on list posts.

 -priv            - when used with -listserv means that the list is private and only the list owner
                    can post to the list (i.e. a mailing list), otherwise the list is considered public
                    (i.e. a discussion list).

 -owner:address   - declares ownership and address for control messages.

 -fetch:path   - specifies a path to which file 'fetch' requests are relative to. Oterwise fetch
                 is diabled. Only list subscribers may issue fetch requests.

 -open         - if specified then anyone can fetch files (see above), not just subscribers.

 -manual       - if specified then list cannot process subscribe/unsubscribe requests.

 -noatt        - if specified then binary-attachments are dropped.

 -probe:address   - test that 'address' is acceptable to designated host WITHOUT sending any mail. Use (optionally)
                    DNS Mail Exchanger info to do the lookup on the actual mail host. use the -host option
                    as well to specifiy a name server (if not 'localhost').

 -mx              - Send mail directly to a recipients mail server rather than routing locally. Use (optionally) with
                    -host:name to specify a DNS server to use for Mail eXchanger lookup.
					(NOT AVAILABLE IN FREE VERSION)

 -mbox:name      - (IMAP4) set the current mailbox (i.e. folder) for posting. Note: some servers do not allow
                    posting to the INBOX.
				    
 -mbox:name      - (IMAP4) set the current mailbox (i.e. folder) for reading (default is INBOX).
				    
 -mbox2:name     - (IMAP4) set the destination mailbox (i.e. folder) for IMAP-to-IMAP relaying.
				    
 -create:name    - (IMAP4) create named mailbox.

 -delete:name    - (IMAP4) delete named mailbox (if no subordinates).

 -move:name      - (IMAP4) move selected message(s) to named mailbox.

 -copy:name      - (IMAP4) copy selected message(s) to named mailbox.

 -list:string    - (IMAP4) list selective mailboxes. For example '-list:"personal/*"' will list all the folders
                   under 'personal' (including sub-sub-folders). Use '-list:"personal/%"' to list just the
                   first sub-level. Use '-list:"%"' to list just the top-level. Of course the delimiter '/' may
                   be different on your system.

 -list           - (IMAP4) list all mailboxes (same as '-list:"*"' option).

 -lsub:string    - (IMAP4) list selective subscribed mailboxes. For example '-lsub:"personal/*"' will list all the subscribed 
                   folders under 'personal' (including sub-sub-folders). Use '-lsub:"personal/%"' to list just the
                   first sub-level. Use '-lsub:"%"' to list just the top-level. Of course the delimiter '/' may
                   be different on your system.

 -lsub           - (IMAP4) list all subscribed mailboxes (same as '-lsub:"*"' option).

 -masq:string    - Used in masquerading. If sender matches string then message is read, otherwise ignored.

 -alias:filename - When relaying use file to translate addresses. Each line of the file is of the form
                   'alias: address' and lines beginning with '#' are ignored. Any address (To:, Cc:) encountered
                   that matches 'alias' will be translated to 'address'. Can be useful with masquerading.
                   Address formats will converted where appropriate and comparison is not case-sensistive.
                   Is also used to provide a conditional read, as any message without an alias match is
                   ignored. 

 -exec:command    - on POP3/IMAP4 read, execute 'command' passing message body to standard-input.

 -limit:n         - send mail to lists in batches of 'n'. gets around RCPT-TO limits on mail servers.

 -xit             - (POP3/IMAP4) Sets exit code (%errorlevel% variable) to the number of messages queued for reading
                    (on some older versions of Windows you may need to divide by 256).

 -etrn:domain     - initiate remote SMTP transfer of queued mail (See RFC 1985).

 -org:name        - the organization name (e.g. -org:"Microsoft Corp.").

 -sens:desc       - describe the 'sensitivity' of the message (e.g. -sens:"Top Secret (for your eyes only)")

 -dh              - automatically decode headers with =?charset?q|b?text?= content (on by default use -nodh to turn off).

 -eh              - automatically encode headers to =?charset?q|b?text?= content (on by default use -noeh to turn off).

 -meter:filename  - write % progress to named file at one second intervals on sends.

 -free            - frees the console window to run detached (usefull only if you can't shell the program as such).

 -pat:pattern     - subject must match wild-card pattern to process message (otherwise it is skipped).
 -nopat:pattern   - subject must not match wild-card pattern to process message (otherwise it is skipped).

                        ( '?' - match exactly one character, '*' - match zero or more )
                        ( '!' - match exactly one alpha, '$' - match zero or more )
                        ( '#' - match exactly one digit, '@' - match zero or more )

                    Use the backslash '\' character to escape an input sequence. For example to use the '*'
                    as a character use the '\*' sequence. Use '\\' where a single backslash is required.

                    For example: postie ... -pat:"*MAKE MONEY FAST*" -rm
					(NOT AVAILABLE IN FREE VERSION)

 -spat:pattern     - sender must match wild-card pattern to process message (otherwise it is skipped).
 -nospat:pattern   - sender must not match wild-card pattern to process message (otherwise it is skipped).

                        ( '?' - match exactly one character, '*' - match zero or more )
                        ( '!' - match exactly one alpha, '$' - match zero or more )
                        ( '#' - match exactly one digit, '@' - match zero or more )

                    Use the backslash '\' character to escape an input sequence. For example to use the '*'
                    as a character use the '\*' sequence. Use '\\' where a single backslash is required.
					(NOT AVAILABLE IN FREE VERSION)

 -cert:certfile   - use client certificate for SSL authentication.

 -gmt/-nogmt      - format date on sent messages in GMT rather than local time. This might fix time-zone
                    and daylight savings problems that some people experience.

 -utc/-noutc      - format date on sent messages in UTC rather than local time. This might fix time-zone
                    and daylight savings problems that some people experience.

 -noop            - no-operation (also NOOP config keyword).

 -unique          - extracted file attachments are given a unique name (if they clash) otherwise it just
                    overwrites a file of the same name (also UNIQUE keyword). See -extract option.

 -hdr:string      - add a mail header to outgoing messages. For example...

						postie -hdr:"X-MyHeader1: blurdy\r\nX-MyHeader2: bloop\r\n" ...

					And note: each header must be terminated by CR+LF (as above).

 -hdr:filename     - as above but read headers from a file, line by line.
					(NOT AVAILABLE IN FREE VERSION)

 -ldap:hostname   - name of an LDAP server to use for directory service lookups (LDAP_HOST in config).
					(NOT AVAILABLE IN FREE VERSION)

 -ldapasdns       - use the same host name for the LDAP server as used with DNS lookups (LDAPASDNS in config).

 -ldapcc          - addresses should be Cc:'d rather than To:'d.
 -ldapbcc         - addresses should be Bcc:'d rather than To:'d.

 -base:string     - LDAP base to use for a search (eg. -base:"o=My organization").
 
 -binddn:string   - LDAP DN to bind with (eg. -binddn:"o=My organization").
 
 -bindpwd:string  - LDAP password to bind with (eg. -bindpwd:"secret").
 
 -search:pattern  - search pattern to look for LDAP lookup (SEARCH in config) (eg. (-search:"cn=smith, john").

 -attrib:name     - name of an LDAP attribute to use for email address (the default is 'mail').

 -retries:nbr     - number of connection retries before giving up (default is zero retries).

 -size            - display message size.
 
 -sort:key-list   - list of keys to sort IMAP messages on (if SORT supported by server). Valid keys are
 					'arrival', 'date', 'cc', 'reverse', 'size', 'subject' and 'to'. The 'reverse'
 					keyword changes the sort order of subsequent keys. For example...
 					
 						postie -imap -sort:"subject reverse date" ...
 
 -search:search-list - list of terms to search IMAP messages on. Valid keys are:

 						postie -imap -search:"since 01-Jan-1999" ...
 						postie -imap -search:"before 01-Jan-1999" ...
 						postie -imap -search:"since 01-Jan-1999 before 30-Jun-1999" ...
 						postie -imap -search:"FLAG unseen" ...
 						postie -imap -search:"subject test" ...

                    where 'FLAG' is one of 'seen/unseen/recent/new/draft/flagged/deleted/undeleted/answered/unasnwered'


 -idle            - when receiveing via IMAP wait for new messages if none present (only if IDLE extension
 					is supported by the server).
 					
 -header:string   - Add prefix string to messages. This can be usefull if message body is being streamed in from a
                    file or standard input via an external process. For example...
                    
                    	postie -header:"Data follows...\n\n" ...
 
 -ssl             - try to enable SSL if the server supports it (old style using special ports).
					(NOT AVAILABLE IN FREE VERSION)

-sslrelay         - use SSL for relaying (on the posting side).
					(NOT AVAILABLE IN FREE VERSION)
					
 -tls             - try to enable SSL if the server supports it (new style STARTTLS/STLS method).
					(NOT AVAILABLE IN FREE VERSION)
 
-tlsrelay         - use TLS for relaying (on the posting side).
					(NOT AVAILABLE IN FREE VERSION)

-mail            - input or output is a raw mail file (use -host: to specify the filename).
 
 -decode:base64   - decode a BASE64 input file.
 -decode:uue      - decode a UUE input file. (NOT IMPLEMENTED YET)
 -decode:qp       - decode a Quoted-Printable input file. (NOT IMPLEMENTED YET)
 
 -encode:base64   - encode a BASE64 output file.
 -encode:uue      - encode a UUE output file. (NOT IMPLEMENTED YET)
 -encode:qp       - encode a Quoted-Printable output file. (NOT IMPLEMENTED YET)
 
 -wrap:n          - wrap encodings (see above) at this many characters per line. MIME/BASE64
                    is 72 (DEFAULT), but others may differ.

 -harvest:filename - save From (or Reply-To if present) addresses to the named file (appended).
 
 -firewall:cmd    - after connecting to a firewall issue the following command (usually a connect string), eg...
 
 						postie -host:fw-server -port:12345 -firewall:"connect my-pop-server 110" -user:...

 -bs              - display the IMAP body structure.
 
 -part:nbr        - extract just the specified IMAP section number (MIME specified part). Section names
                    (part specifiers) can be determined from the IMAP body structure display (see
                    above). This is very obscure and mainly a debugging aid. Use with '-encoding:type'
					to preset for decoding to get a raw binary object.

 -part:nbr:offset:n  - extract just the specified IMAP section (MIME specified part). Start at the specified
                       byte offset 'off' and retrieve 'n' bytes.

 -encoding:type   - specify the encoding used on the part (above) so that it can be decoded. Should be
                    one of "base64", "quoted-printable", "7bit", "8bit" or "uuencoded" (or "none").
                    
 -vpim            - package a Voice Profile for Internet Mail version 2 message. Use the extended form
                    of the '-a:filename|headers' option to attach media.

 -pgp[:program]      - use PGP to encrypt/decrypt and/or sign/verify (eg. -pgp:"pgp.exe" is the default).
 -pgppass:passphrase - PGP passphrase
 -sign               - PGP sign messages (eg. -pgp -sign)
 -encrypt            - PGP encrypt messages (eg. -pgp -encrypt)

 -kbs             - on send and receive display the KB/sec transfer rate.

 -ipv6            - use IPv6 addresses in preference to IPv4 if both exist (default is the other way).

 -tunnel:proxy[:port] - use HTTP tunnelling (if possible) to access external services. The value of 'port' defaults
                       to '80' if not specified.
					(NOT AVAILABLE IN FREE VERSION)

 -noesc            - only decode \r, \n and \t escapes in message and header strings (-msg:string, -hdr:string).
 --noesc           - don't even decode \r, \n and \t in message string (-msg:string).

 -http11           - use HTTP/1.1 instead of HTTP/1.0 protocol (WebDAV commands set this automatically).
 -nohttp11         - don't use HTTP/1.1, instead use HTTP/1.0 protocol (the default)

 -umbox            - raw output is in Unix 'mbox' format (use with -raw).
 -if:address       - set specific interface address to bind outgoing connections (eg. -if:192.168.1.100)
					(NOT AVAILABLE IN FREE VERSION)

 -force            - force unnamed attachments to be saved as attachments when extracting. Sets -unique as well.


 -depth:nbr         - set the depth for a WebDAV collection operation (default is 'infinity')'
 -propfind:xmlfile  - execute WebDAV 'PROPFIND' operation on the URL named in '-url:URL'. Payload is the
                      file named in 'xmlfile'.
 -proppatch:xmlfile - execute WebDAV 'PROPATCH' operation on the URL named in '-url:URL'. Payload is the
                      file named in 'xmlfile'.
 -mkcol             - execute WebDAV 'MKCOL' operation to create the URL named in '-url:URL'.
 -copy:desturl      - execute WebDAV 'COPY' operation on the URL named in '-url:URL'. Destination is 'desturl'.
 -move:desurl       - execute WebDAV 'MOVE' operation on the URL named in '-url:URL'. Destination is 'desturl'.
 -put:file          - execute WebDAV/HTTP 'PUT' operation on the URL named in '-url:URL'. Payload is 'file'.
 -delete            - execute WebDAV/HTTP 'DELETE' operation to delete the URL named in '-url:URL'.
					(NOT AVAILABLE IN FREE VERSION)



 -register         - execute a SIP 'REGISTER' operation (use -to and auth options) to log in.
 -message          - execute a SIP 'MESSAGE' operation (use -to, -from, -s, -msg:string options) to a logged in user.
 -contact:address  - set the SIP (or other) contact address.


SIP operations support both TCP and UDP (the default) modes, for example:

  postie -user:andrew -pass:passwd -to:"sip:me@example.test" -contact:"sip:me@pc1.example.test" -register
  postie -user:andrew -pass:passwd -to:"sip:me@example.test;transport=udp" -contact:"sip:me@pc1.example.test" -register

are all equivalent and use UDP, while:

  postie -user:andrew -pass:passwd -to:"sip:me@example.test;transport=tcp" -contact:"sip:me@pc1.example.test" -register

uses TCP. For SSL use:

  postie -user:andrew -pass:passwd -to:"sips:me@example.test" -contact:"sip:me@pc1.example.test" -register

and TCP is assumed for SSL connections. To send an instant message to a currently online
(ie. registered) user do:

  postie -to:"you@example.test" -from:"me@example.test" -s:"test" -msg:"line1\nline2\nline3" -message



SIP (Session Initiation Protocol) options are NOT AVAILABLE IN FREE VERSION.



WebDAV (Web Distributed Authoring and Versioning) options are NOT AVAILABLE IN FREE VERSION.



Note: the -pgp option assumes PGP is installed on the computer and accessible. When a pass-phrase is needed
it is assumed to be available to PGP via the command-line or an environment setting.




EXAMPLES:


Decode a BASE64 encoded file...

	postie -decode:base64 <encoded-file >plain-file


Encode a BASE64 plain file...

	postie -encode:base64 -wrap:64 <plain-file >encoded-file


Sending mail...

    postie -host:mailserver.com -from:fred@here -to:joe@there -s:"Here it is..." -nomsg -a:file.zip
    postie -from:fred@here -to:joe@there -to:fred@there -s:"Hello there" <file.txt
    postie -from:fred@here -to:joe@there -s:"Hello there" -msg:"This a mail message"
    postie -from:fred@here -to:joe@there -s:"Hello there" -html -file:file1.html
    postie -from:fred@here -to:"Joe Blow <joe@blow>" -s:"Hello there" -msg:"This a mail message"


Sending mail direct to user...

    postie -mx -from:fred@here -to:joe@there -s:"Here it is..." -nomsg -a:file.zip


Posting mail direct to an IMAP folder...

    postie -from:fred@here -to:joe@there -s:"Here it is..." -msg:text -imap -mbox:"Sent Items"


Sending a VPIM package...

	postie [posting options] -vpim
		-a:"message.wav|Content-Type: audio/x-ms-wav\nContent-Disposition: inline; voice=voice-message; filename=\"message.wav\""
		-a:"fax.tif|Content-Type: image/tiff; application=faxbw"
		-a:"andrew.vcf|Content-Type: text/directory; charset=us-ascii; profile=vCard"


Sending PGP encrypted mail...

	postie -pgp -encrypt -to:address -from:address -s:subject -file:message-file

	Assumes that the recipient address is found in the local public keyring.


Sending PGP signed mail...

	postie -pgp -sign -to:address -from:address -s:subject -file:message-file -pgppass:my-pass-phrase

	Assumes that the sender address is found in the local public keyring.


Sending PGP signed and encrypted mail... (NOT IMPLEMENTED YET)

	postie -pgp -encrypt -sign -to:address -from:address -s:subject -file:message-file -pgppass:my-pass-phrase

	Assumes that the sender and recipient addresses are found in the local public keyring.



Sending MHTML (MIME HTML) with embedded objects...

    Create a file 'test.html' as follows:

		<html>
		<head>
		<title>Test MIME HTML Aggregate Encapsulation</title>
		</head>
		<body>
		<bgsound src="cid:sound">
		This is an image that is an example of MIME HTML aggregate encapsulation...
		<img align=right src="cid:image">
		</body>
		</html>

    Then run POSTIE:

		postie -to:me -from:me -s:test -html -alt -file:test.html -i:"tada.wav|cid:sound" -i:"new.gif|cid:image"

    The resultant email message can be viewed in all it's graphic glory by the recipient even if they
    don't have Web access. Technically, a CID is specified as 'cid:GUID' where a 'GUID' is a globally
    unique identifier and the recommended form for one is 'SUID@domain' where 'SUID' is a site unique
    identifier. So the above example cheats!

    There is another form that uses HTTP references...

		<img align=right src="image.gif">

    Then run POSTIE:

		postie -to:me -from:me -s:test -html -alt -file:test.html -i:"d:\images\new.gif|image.gif" 

    which works with Microsoft Outlook98 but not with Netscape/Mozilla.


Posting contents of an HTML form...

    <form method=POST action="/cgi-bin/postie.exe?-cgi:-from:fred@here&-to:joe@there&-s:Enquiries+form&-post&-redirect:/enquiries/done.html">
	<input type=submit value="Send">
	</form>


Send email from an HTML form...

	<form method=POST action="/cgi-bin/postie.exe?-cgi:-post&-from:me@here.com">
	<input type=hidden name=postie_host value="here.com">
	Subject: <input type=text name=postie_subject size=72><br>
	To: <input type=text name=postie_to size=72><br>
	Cc: <input type=text name=postie_cc size=72><br>
	Bcc: <input type=text name=postie_bcc size=72><br>
	<textarea name=postie_data cols=72 rows=10 wrap></textarea><br>
	<input type=checkbox name=postie_html> HTML mail?
	<input type=checkbox name=postie_news> To newsgroup?
	<input type=submit name=postie_submit value="Send">
	</form>

	The 'host' and 'from' values can also be set in a config file called 'postie.txt' which should be in the same
    directory as the POSTIE executable or in the home directory of the account the CGI runs as (depending of course
    upon which Web server is in use). See sample file 'postie.txt' in this directory.


Sending news...

    postie -news -host:newsserver.com -from:fred@here -to:alt.test -s:"Test: ignore" -msg:"Testing" [-user:userid -pass:secret]


Deliver URL by email...

    postie -host:mailserver.com -to:fred -from:me -s:"Here it is" -nomsg -url:"http://somewhere.com/help/readme.txt" -rm


Get URL...

    postie -noop -extract:"c:\temp" -url:"http://somewhere.com/help/readme.txt"


Get URL to file...

    postie -noop -extract:"c:\temp" -url:"http://somewhere.com/cgi-bin/test.pl?a=1&b=2|test.html"


Make XML (in this case XML-RPC) call...

	postie -noop -mime:"text/xml" -post:"validator1.arrayofstructstest.xml" -url:"http://validator.xmlrpc.com:80/RPC2|result.xml"


Make WebDAV call...

	postie -noop -mime:"text/xml" -mkcol:"webdav.xml" -url:"http://webdav.mydomain/webdav/my-collection"


Listing mail...

    postie -host:mailserver.com -user:userid -pass:secret -br
    postie -host:mailserver.com -user:userid -pass:secret -br -imap -mbox:personal


Retrieving mail...

    postie -host:mailserver.com -user:userid -pass:secret -msg:1 -file:mail.dat -extract -rm


Read from a mail file...

    postie -host:"c:\temp\winmail.eml" -mail -extract


Post to a mail file...

    postie -host:"c:\temp\winmail.eml" -mf -to:address -from:address -s:subject -msg:string ...


Read from a mail file and forward on...

    postie -host:"c:\temp\winmail.eml" -mail -relay:mail-server [-to:address]


Relaying mail from a drop box...

    postie -host:mailserver.com -user:userid -pass:secret -relay:localserver.com -rm

    This is a very risky and unreliable operation as it depends on the validity of the To: header
    and that it not contain a loop. Also, if you are the Cc: (or Bcc:) recipient then the message
    will be delivered (again) to the original (To:) recipient and not you. In short, it is much
    preferable to use the form below, where the recipient is forced to the specified address.


As above but forwarding mail to a user...

    postie -host:mailserver.com -user:userid -pass:secret -relay:mail.server -to:andrew -rm


Relaying masqueraded mail...

    postie -host:mailserver.com -user:userid -pass:secret -relay:localserver.com -alias:alias.txt -rm

	Create a file 'alias.txt' like...

          "John Smith" <account@mailserver.com>: john@localserver.com
          "Mary Jones" <account@mailserver.com>: mary@localserver.com
          account@mailserver.com: postmaster@localserver.com

    and note: the last entry is a 'catch-all' to pick up any other mail items. You can leave this out if you
    need to mix masqueraded and 'real' mail in the one account as unmatched items will not be deleted when -rm
    option used.


Running from a CGI program...

	To run Postie from a CGI program and get it to process command-line arguments properly you must first
	un-set the environment variable 'GATEWAY_INTERFACE' or run the program without inheriting the parent CGI
	program's environment.
	
or...
	
	Run the postiecgi.exe instead.


List-server...

	postie -host:mail.server -user:postie-list -pass:secret -listserv:postie-list@server -tolist:postie.lst -owner:adavison@ozemail.com.au -log:postie-list.log -rm

   Send messages with 'subscribe' or 'unsubscribe' as the subject to control the list. Posts sent to the
   list will be distributed to all members of the list and will be seen as originating from the list (that
   is their email address will not be displayed unless a signature is included). This means that replying
   to a posting will go back to the list. This may annoy some people, but it's how i've always wanted lists
   to work and saves a lot of bother if you ask me. Undeliverable message returns will not flood the whole
   list as only subscribers are allowed to post.

   Can now request files with 'INDEX' (or 'DIR') or 'FETCH filename' (or 'GETt filename') as the subject. Selected files are
   returned as an email attachment. Requested files are relative to the '-fetch:path' directory if specified. If not
   specified then fetch mode is disabled. Only list subscribers may fetch files unless '-open' is used.

   To make a mailing-list (ie. mailout-list) and not a discussion-list add the '-priv' option.


Auto-dialling...

	The following example is for NT...

		postie -connect:"My ISP" -noop
		postie options...
		postie -disconnect -noop

				or in one go...

		postie -connect:"My ISP" options... -disconnect

	Use escaped quotes to add additional parameters or to use embedded spaces eg.

		postie -connect:"\"My ISP\" userid passwd" etc.

	The configuration file 'postie.txt' MUST contain a line specifying the dialer
	program to use...

		DIALER rasdial           - for NT
		DIALER rasdial95         - for 95 (a shareware product I believe) 

	Use of Inetrnet connection management in Win98 should make use of dialer as above
	unnecessary.



Masquerading...

	Added mailbox masquerading using '-masq:username' option. This can
	be useful where you have only one mailbox account but multiple
	users. Each user sends mail with a from address of the form...

	  -from:"John.Smith <account@mailserver.com>"       OR
	  -from:"Mary.Jones <account@mailserver.com>"

	Then each individual's mail can be retrieved as follows...

	  postie -host:mailserver.com -user:account -pass:secret -masq:"John Smith"
  	  postie -host:mailserver.com -user:account -pass:secret -masq:"Mary Jones"

	Masquerading allows you to share a mailbox! The naming comes from Linux
	IP Masquerading which does the same thing but for IP addresses. You would
	probably want to use this feature with the '-relay' option to dump to local
	accounts.

    You will probably now want to use the new -alias:filename option instead of
    multiple commands using -masq.


XML reading...

	postie -xml -file:test.xml -id:marketing -descendant:1:name:hair:yellow
	postie -xml -file:test.xml -descendant:2:name:hair:yellow


XML editing...

	postie -xml -file:test.xml -descendant:2:name:hair:yellow -child:1 -set:Lorrikeet -save:test2.xml


LDAP Directory Services


	For example...

		postie -ldap:server-name -binddn:"o=My Org" -bindpwd:"secret" -base:"o=My Org" -search:"cn=some-name" -noop

	will print out any common-name matches on 'some-name'. And...

		postie -ldapasdns -mx -search:"cn=some-name" -from:"my@ddress" -s:"test via LDAP" -msg:test

	will send to the Internet address listed for 'some-name'. The LDAP server is assumed to be
	the same as the DNS server (as retrieved from the TCP/IP info in the registry).




Language:

To customise the output for non-English language copy the following to the 'postie.txt' configuration file...

STRING_Folder <== Folder 
STRING_Moveto Move to ==> 
STRING_Delete Delete 
STRING_UnDelete Undelete 
STRING_Forward Forward... 
STRING_Reply Reply... 
STRING_Newsgroup Newsgroup? 
STRING_Trace Trace? 
STRING_Send Send 
STRING_View View... 
STRING_Create Create ==> 
STRING_Compose Compose...
STRING_Purge Purge
STRING_Logout Logout
STRING_Bcc Bcc 
STRING_Cc Cc 
STRING_To To
STRING_From From
STRING_replyto Reply-To
STRING_Date Date
STRING_Subject Subject 
STRING_Wrote Wrote: 
STRING_Thereare There are 
STRING_Messageswaiting messages waiting 
STRING_Deletemessage Delete message # 
STRING_Inlineattachment Inline attachment?
STRING_Importance Importance
STRING_Sensitivity Sensitivity
STRING_Organization Organization
STRING_ReceiptTo Disposition-Notification-To

Modify each line after the first space character to suit.




MISCELANEOUS:

Bug reports, compatability problems, recommendations for improvements etc gratefully received.


